# LLM Prompt for Documentation

## Documentation

### Path

#### MetadataErr

**Type Annotation**

**Description**

An error when reading a path's file metadata from disk.

#### Path

**Type Annotation**

**Description**

Represents a path to a file or directory on the filesystem.

#### DirEntry

**Type Annotation**

**Description**

Record which represents a directory

> This is the same as [`Dir.DirEntry`](Dir#DirEntry).

#### ReadErr

**Type Annotation**

**Description**

Tag union of possible errors when reading a file or directory.

> This is the same as [`File.ReadErr`](File#ReadErr).

#### WriteErr

**Type Annotation**

**Description**

Tag union of possible errors when writing a file or directory.

> This is the same as [`File.WriteErr`](File#WriteErr).

#### DirErr

**Type Annotation**

**Description**

**NotFound** - This error is raised when the specified directory does not exist, typically during attempts to access or manipulate it.

**PermissionDenied** - Occurs when the user lacks the necessary permissions to perform an action on a directory, such as reading, writing, or executing.

**AlreadyExists** - This error is thrown when trying to create a directory that already exists.

**NotADirectory** - Raised when an operation that requires a directory (e.g., listing contents) is attempted on a file instead.

**Other** - A catch-all for any other types of errors not explicitly listed above.

> This is the same as [`Dir.Err`](Dir#Err).

#### write

**Type Annotation**

```roc

    val, 
    Path, 
    fmt
    -> Task {} [FileWriteErr Path WriteErr]
    where val implements Encoding, fmt implements EncoderFormatting
```

**Description**

Write data to a file.

First encode a `val` using a given `fmt` which implements the ability [Encode.EncoderFormatting](https://www.roc-lang.org/builtins/Encode#EncoderFormatting).

For example, suppose you have a `Json.toCompactUtf8` which implements
[Encode.EncoderFormatting](https://www.roc-lang.org/builtins/Encode#EncoderFormatting).
You can use this to write [JSON](https://en.wikipedia.org/wiki/JSON)
data to a file like this:

```
# Writes `{"some":"json stuff"}` to the file `output.json`:
Path.write
    { some: "json stuff" }
    (Path.fromStr "output.json")
    Json.toCompactUtf8
```

This opens the file first and closes it after writing to it.
If writing to the file fails, for example because of a file permissions issue, the task fails with [WriteErr].

> To write unformatted bytes to a file, you can use [Path.writeBytes] instead.

#### writeBytes

**Type Annotation**

```roc
List U8, Path -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Writes bytes to a file.

```
# Writes the bytes 1, 2, 3 to the file `myfile.dat`.
Path.writeBytes [1, 2, 3] (Path.fromStr "myfile.dat")
```

This opens the file first and closes it after writing to it.

> To format data before writing it to a file, you can use [Path.write] instead.

#### writeUtf8

**Type Annotation**

```roc
Str, Path -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Writes a [Str] to a file, encoded as [UTF-8](https://en.wikipedia.org/wiki/UTF-8).

```
# Writes "Hello!" encoded as UTF-8 to the file `myfile.txt`.
Path.writeUtf8 "Hello!" (Path.fromStr "myfile.txt")
```

This opens the file first and closes it after writing to it.

> To write unformatted bytes to a file, you can use [Path.writeBytes] instead.

#### fromStr

**Type Annotation**

```roc
Str -> Path
```

**Description**

Note that the path may not be valid depending on the filesystem where it is used.
For example, paths containing `:` are valid on ext4 and NTFS filesystems, but not
on FAT ones. So if you have multiple disks on the same machine, but they have
different filesystems, then this path could be valid on one but invalid on another!

It's safest to assume paths are invalid (even syntactically) until given to an operation
which uses them to open a file. If that operation succeeds, then the path was valid
(at the time). Otherwise, error handling can happen for that operation rather than validating
up front for a false sense of security (given symlinks, parts of a path being renamed, etc.).

#### fromBytes

**Type Annotation**

```roc
List U8 -> Path
```

**Description**

Not all filesystems use Unicode paths. This function can be used to create a path which
is not valid Unicode (like a [Str] is), but which is valid for a particular filesystem.

Note that if the list contains any `0` bytes, sending this path to any file operations
(e.g. `Path.readBytes` or `WriteStream.openPath`) will fail.

#### display

**Type Annotation**

```roc
Path -> Str
```

**Description**

Unfortunately, operating system paths do not include information about which charset
they were originally encoded with. It's most common (but not guaranteed) that they will
have been encoded with the same charset as the operating system's curent locale (which
typically does not change after it is set during installation of the OS), so
this should convert a [Path] to a valid string as long as the path was created
with the given `Charset`. (Use `Env.charset` to get the current system charset.)

For a conversion to [Str] that is lossy but does not return a [Result], see
[display].
toInner : Path -> [Str Str, Bytes (List U8)]
Assumes a path is encoded as [UTF-8](https://en.wikipedia.org/wiki/UTF-8),
and converts it to a string using `Str.display`.

This conversion is lossy because the path may contain invalid UTF-8 bytes. If that happens,
any invalid bytes will be replaced with the [Unicode replacement character](https://unicode.org/glossary/#replacement_character)
instead of returning an error. As such, it's rarely a good idea to use the [Str] returned
by this function for any purpose other than displaying it to a user.

When you don't know for sure what a path's encoding is, UTF-8 is a popular guess because
it's the default on UNIX and also is the encoding used in Roc strings. This platform also
automatically runs applications under the [UTF-8 code page](https://docs.microsoft.com/en-us/windows/apps/design/globalizing/use-utf8-code-page)
on Windows.

Converting paths to strings can be an unreliable operation, because operating systems
don't record the paths' encodings. This means it's possible for the path to have been
encoded with a different character set than UTF-8 even if UTF-8 is the system default,
which means when [display] converts them to a string, the string may include gibberish.
[Here is an example.](https://unix.stackexchange.com/questions/667652/can-a-file-path-be-invalid-utf-8/667863#667863)

If you happen to know the `Charset` that was used to encode the path, you can use
`toStrUsingCharset` instead of [display].

#### isDir

**Type Annotation**

```roc
Path -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a directory.
Any error will return false.

> [`File.isDir`](File#isDir) does the same thing, except it takes a [Str] instead of a [Path].

#### isFile

**Type Annotation**

```roc
Path -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a regular file.
Any error will return false.
This uses [rust's std::path::is_file](https://doc.rust-lang.org/std/path/struct.Path.html#method.is_file).

> [`File.isFile`](File#isFile) does the same thing, except it takes a [Str] instead of a [Path].

#### isSymLink

**Type Annotation**

```roc
Path -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a symbolic link.
Any error will return false.

> [`File.isSymLink`](File#isSymLink) does the same thing, except it takes a [Str] instead of a [Path].

#### type

**Type Annotation**

```roc

    Path
    -> Task 
        [
            IsFile,
            IsDir,
            IsSymLink
        ] [PathErr MetadataErr]
```

**Description**

Return the type of the path if the path exists on disk.

> [`File.type`](File#type) does the same thing, except it takes a [Str] instead of a [Path].

#### withExtension

**Type Annotation**

```roc
Path, Str -> Path
```

**Description**

If the last component of this path has no `.`, appends `.` followed by the given string.
Otherwise, replaces everything after the last `.` with the given string.

```
# Each of these gives "foo/bar/baz.txt"
Path.fromStr "foo/bar/baz" |> Path.withExtension "txt"
Path.fromStr "foo/bar/baz." |> Path.withExtension "txt"
Path.fromStr "foo/bar/baz.xz" |> Path.withExtension "txt"
```

#### delete

**Type Annotation**

```roc
Path -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Deletes a file from the filesystem.

Performs a [`DeleteFile`](https://docs.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-deletefile)
on Windows and [`unlink`](https://en.wikipedia.org/wiki/Unlink_(Unix)) on
UNIX systems. On Windows, this will fail when attempting to delete a readonly
file; the file's readonly permission must be disabled before it can be
successfully deleted.

```
# Deletes the file named
Path.delete (Path.fromStr "myfile.dat") [1, 2, 3]
```

> This does not securely erase the file's contents from disk; instead, the operating
system marks the space it was occupying as safe to write over in the future. Also, the operating
system may not immediately mark the space as free; for example, on Windows it will wait until
the last file handle to it is closed, and on UNIX, it will not remove it until the last
[hard link](https://en.wikipedia.org/wiki/Hard_link) to it has been deleted.

> [`File.delete`](File#delete) does the same thing, except it takes a [Str] instead of a [Path].

#### readUtf8

**Type Annotation**

```roc

    Path
    -> Task Str 
        [
            FileReadErr Path ReadErr,
            FileReadUtf8Err Path 
        ]
```

**Description**

Reads a [Str] from a file containing [UTF-8](https://en.wikipedia.org/wiki/UTF-8)-encoded text.

```
# Reads UTF-8 encoded text into a Str from the file "myfile.txt"
Path.readUtf8 (Path.fromStr "myfile.txt")
```

This opens the file first and closes it after writing to it.
The task will fail with `FileReadUtf8Err` if the given file contains invalid UTF-8.

> To read unformatted bytes from a file, you can use [Path.readBytes] instead.
>
> [`File.readUtf8`](File#readUtf8) does the same thing, except it takes a [Str] instead of a [Path].

#### readBytes

**Type Annotation**

```roc
Path -> Task (List U8) [FileReadErr Path ReadErr]
```

**Description**

Reads all the bytes in a file.

```
# Read all the bytes in `myfile.txt`.
Path.readBytes (Path.fromStr "myfile.txt")
```

This opens the file first and closes it after reading its contents.

> To read and decode data from a file, you can use `Path.read` instead.
>
> [`File.readBytes`](File#readBytes) does the same thing, except it takes a [Str] instead of a [Path].

#### listDir

**Type Annotation**

```roc
Path -> Task (List Path) [DirErr DirErr]
```

**Description**

Lists the files and directories inside the directory.

> [`Dir.list`](Dir#list) does the same thing, except it takes a [Str] instead of a [Path].

#### deleteEmpty

**Type Annotation**

```roc
Path -> Task {} [DirErr DirErr]
```

**Description**

Deletes a directory if it's empty

This may fail if:
  - the path doesn't exist
  - the path is not a directory
  - the directory is not empty
  - the user lacks permission to remove the directory.

> [`Dir.deleteEmpty`](Dir#deleteEmpty) does the same thing, except it takes a [Str] instead of a [Path].

#### deleteAll

**Type Annotation**

```roc
Path -> Task {} [DirErr DirErr]
```

**Description**

Recursively deletes a directory as well as all files and directories
inside it.

This may fail if:
  - the path doesn't exist
  - the path is not a directory
  - the directory is not empty
  - the user lacks permission to remove the directory.

> [`Dir.deleteAll`](Dir#deleteAll) does the same thing, except it takes a [Str] instead of a [Path].

#### createDir

**Type Annotation**

```roc
Path -> Task {} [DirErr DirErr]
```

**Description**

Creates a directory

This may fail if:
  - a parent directory does not exist
  - the user lacks permission to create a directory there
  - the path already exists.

> [`Dir.create`](Dir#create) does the same thing, except it takes a [Str] instead of a [Path].

#### createAll

**Type Annotation**

```roc
Path -> Task {} [DirErr DirErr]
```

**Description**

Creates a directory recursively adding any missing parent directories.

This may fail if:
  - the user lacks permission to create a directory there
  - the path already exists

> [`Dir.createAll`](Dir#createAll) does the same thing, except it takes a [Str] instead of a [Path].

### Arg

#### list

**Type Annotation**

```roc
{} -> Task (List Str) *
```

**Description**

Gives a list of the program's command-line arguments.

#### parse

**Type Annotation**

```roc

    CliParser state
    -> Task state 
        [
            Exit I32 Str,
            StdoutErr Stdout.Err
        ]
```

**Description**

Parse arguments using a CLI parser or show a useful message on failure.

We have the following priorities in returning messages to the user:
1) If the `-h/--help` flag is passed, the help page for the command/subcommand
   called will be displayed no matter if your arguments were correctly parsed.
2) If the `-V/--version` flag is passed, the version for the app will
   be displayed no matter if your arguments were correctly parsed.
3) If the provided arguments were parsed and neither of the above two
   built-in flags were passed, we return to you your data.
4) If the provided arguments were not correct, we return a short message
   with which argument was not provided correctly, followed by the
   usage section of the relevant command/subcommand's help text.

```roc
exampleCli =
    { Cli.combine <-
        verbosity: Opt.count { short: "v", help: "How verbose our logs should be." },
        alpha: Opt.maybeU64 { short: "a", help: "Set the alpha level." },
    }
    |> Cli.finish {
        name: "example",
        version: "v0.1.0",
        description: "An example CLI.",
    }
    |> Cli.assertValid

expect
    exampleCli
    |> Cli.parseOrDisplayMessage ["example", "-h"]
    == Err
        """
        example v0.1.0

        An example CLI.

        Usage:
          example [OPTIONS]

        Options:
          -v             How verbose our logs should be.
          -a             Set the alpha level.
          -h, --help     Show this help page.
          -V, --version  Show the version.
        """

expect
    exampleCli
    |> Cli.parseOrDisplayMessage ["example", "-V"]
    == Err "v0.1.0"

expect
    exampleCli
    |> Cli.parseOrDisplayMessage ["example", "-v"]
    == Ok { verbosity: 1 }

expect
    exampleCli
    |> Cli.parseOrDisplayMessage ["example", "-x"]
    == Err
        """
        Error: The argument -x was not recognized.

        Usage:
          example [OPTIONS]
        """
```

### Dir

#### Err

**Type Annotation**

```roc
Path.DirErr
```

**Description**

**NotFound** - This error is raised when the specified path does not exist, typically during attempts to access or manipulate it, but also potentially when trying to create a directory and a parent directory does not exist.

**PermissionDenied** - Occurs when the user lacks the necessary permissions to perform an action on a directory, such as reading, writing, or executing.

**Other** - A catch-all for any other types of errors not explicitly listed above.

> This is the same as [`Path.DirErr`].

#### DirEntry

**Type Annotation**

```roc
Path.DirEntry
```

**Description**

Record which represents a directory

> This is the same as [`Path.DirEntry`].

#### list

**Type Annotation**

```roc
Str -> Task (List Path) [DirErr Err]
```

**Description**

Lists the files and directories inside the directory.

> [Path.listDir] does the same thing, except it takes a [Path] instead of a [Str].

#### deleteEmpty

**Type Annotation**

```roc
Str -> Task {} [DirErr Err]
```

**Description**

Deletes a directory if it's empty

This may fail if:
  - the path doesn't exist
  - the path is not a directory
  - the directory is not empty
  - the user lacks permission to remove the directory.

> [Path.deleteEmpty] does the same thing, except it takes a [Path] instead of a [Str].

#### deleteAll

**Type Annotation**

```roc
Str -> Task {} [DirErr Err]
```

**Description**

Recursively deletes the directory as well as all files and directories
inside it.

This may fail if:
  - the path doesn't exist
  - the path is not a directory
  - the directory is not empty
  - the user lacks permission to remove the directory.

> [Path.deleteAll] does the same thing, except it takes a [Path] instead of a [Str].

#### create

**Type Annotation**

```roc
Str -> Task {} [DirErr Err]
```

**Description**

Creates a directory

This may fail if:
  - a parent directory does not exist
  - the user lacks permission to create a directory there
  - the path already exists.

> [Path.createDir] does the same thing, except it takes a [Path] instead of a [Str].

#### createAll

**Type Annotation**

```roc
Str -> Task {} [DirErr Err]
```

**Description**

Creates a directory recursively adding any missing parent directories.

This may fail if:
  - the user lacks permission to create a directory there
  - the path already exists

> [Path.createAll] does the same thing, except it takes a [Path] instead of a [Str].

### Env

#### cwd

**Type Annotation**

```roc
Task Path [CwdUnavailable]
```

**Description**

Reads the [current working directory](https://en.wikipedia.org/wiki/Working_directory)
from the environment. File operations on relative [Path]s are relative to this directory.

#### setCwd

**Type Annotation**

```roc
Path -> Task {} [InvalidCwd]
```

**Description**

Sets the [current working directory](https://en.wikipedia.org/wiki/Working_directory)
in the environment. After changing it, file operations on relative [Path]s will be relative
to this directory.

#### exePath

**Type Annotation**

```roc
Task Path [ExePathUnavailable]
```

**Description**

Gets the path to the currently-running executable.

#### var

**Type Annotation**

```roc
Str -> Task Str [VarNotFound]
```

**Description**

Reads the given environment variable.

If the value is invalid Unicode, the invalid parts will be replaced with the
[Unicode replacement character](https://unicode.org/glossary/#replacement_character) ('�').

#### decode

**Type Annotation**

```roc

    Str
    -> Task val 
        [
            VarNotFound,
            DecodeErr DecodeError
        ]
    where val implements Decoding
```

**Description**

Reads the given environment variable and attempts to decode it.

The type being decoded into will be determined by type inference. For example,
if this ends up being used like a `Task U16 _` then the environment variable
will be decoded as a string representation of a `U16`. Trying to decode into
any other type will fail with a `DecodeErr`.

Supported types include;
- Strings,
- Numbers, as long as they contain only numeric digits, up to one `.`, and an optional `-` at the front for negative numbers, and
- Comma-separated lists (of either strings or numbers), as long as there are no spaces after the commas.

For example, consider we want to decode the environment variable `NUM_THINGS`;

```
# Reads "NUM_THINGS" and decodes into a U16
getU16Var : Str -> Task U16 [VarNotFound, DecodeErr DecodeError] [Read [Env]]
getU16Var = \var -> Env.decode var
```

If `NUM_THINGS=123` then `getU16Var` succeeds with the value of `123u16`.
However if `NUM_THINGS=123456789`, then `getU16Var` will
fail with [DecodeErr](https://www.roc-lang.org/builtins/Decode#DecodeError)
because `123456789` is too large to fit in a [U16](https://www.roc-lang.org/builtins/Num#U16).


#### dict

**Type Annotation**

```roc
{} -> Task (Dict Str Str) *
```

**Description**

Reads all the process's environment variables into a [Dict].

If any key or value contains invalid Unicode, the [Unicode replacement character](https://unicode.org/glossary/#replacement_character)
will be used in place of any parts of keys or values that are invalid Unicode.

#### platform

**Type Annotation**

```roc
Task 
    {
        arch : ARCH,
        os : OS
    } *
```

**Description**

Returns the current Achitecture and Operating System.

`ARCH : [X86, X64, ARM, AARCH64, OTHER Str]`
`OS : [LINUX, MACOS, WINDOWS, OTHER Str]`

Note these values are constants from when the platform is built.


#### tempDir

**Type Annotation**

```roc
{} -> Task Path *
```

**Description**

This uses rust's [`std::env::temp_dir()`](https://doc.rust-lang.org/std/env/fn.temp_dir.html)

!! From the Rust documentation:

The temporary directory may be shared among users, or between processes with different privileges;
thus, the creation of any files or directories in the temporary directory must use a secure method
to create a uniquely named file. Creating a file or directory with a fixed or predictable name may
result in “insecure temporary file” security vulnerabilities.


### File

#### ReadErr

**Type Annotation**

```roc
Path.ReadErr
```

**Description**

Tag union of possible errors when reading a file or directory.

> This is the same as [`Path.ReadErr`].

#### WriteErr

**Type Annotation**

```roc
Path.WriteErr
```

**Description**

Tag union of possible errors when writing a file or directory.

> This is the same as [`Path.WriteErr`].

#### write

**Type Annotation**

```roc

    val, 
    Str, 
    fmt
    -> Task {} [FileWriteErr Path WriteErr]
    where val implements Encoding, fmt implements EncoderFormatting
```

**Description**

Write data to a file.

First encode a `val` using a given `fmt` which implements the ability [Encode.EncoderFormatting](https://www.roc-lang.org/builtins/Encode#EncoderFormatting).

For example, suppose you have a `Json.toCompactUtf8` which implements
[Encode.EncoderFormatting](https://www.roc-lang.org/builtins/Encode#EncoderFormatting).
You can use this to write [JSON](https://en.wikipedia.org/wiki/JSON)
data to a file like this:

```
# Writes `{"some":"json stuff"}` to the file `output.json`:
File.write
    { some: "json stuff" }
    (Path.fromStr "output.json")
    Json.toCompactUtf8
```

This opens the file first and closes it after writing to it.
If writing to the file fails, for example because of a file permissions issue, the task fails with [WriteErr].

> To write unformatted bytes to a file, you can use [File.writeBytes] instead.
>
> [Path.write] does the same thing, except it takes a [Path] instead of a [Str].

#### writeBytes

**Type Annotation**

```roc
List U8, Str -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Writes bytes to a file.

```
# Writes the bytes 1, 2, 3 to the file `myfile.dat`.
File.writeBytes [1, 2, 3] (Path.fromStr "myfile.dat")
```

This opens the file first and closes it after writing to it.

> To format data before writing it to a file, you can use [File.write] instead.
>
> [Path.writeBytes] does the same thing, except it takes a [Path] instead of a [Str].

#### writeUtf8

**Type Annotation**

```roc
Str, Str -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Writes a [Str] to a file, encoded as [UTF-8](https://en.wikipedia.org/wiki/UTF-8).

```
# Writes "Hello!" encoded as UTF-8 to the file `myfile.txt`.
File.writeUtf8 "Hello!" "myfile.txt"
```

This opens the file first and closes it after writing to it.

> To write unformatted bytes to a file, you can use [File.writeBytes] instead.
>
> [Path.writeUtf8] does the same thing, except it takes a [Path] instead of a [Str].

#### delete

**Type Annotation**

```roc
Str -> Task {} [FileWriteErr Path WriteErr]
```

**Description**

Deletes a file from the filesystem.

Performs a [`DeleteFile`](https://docs.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-deletefile)
on Windows and [`unlink`](https://en.wikipedia.org/wiki/Unlink_(Unix)) on
UNIX systems. On Windows, this will fail when attempting to delete a readonly
file; the file's readonly permission must be disabled before it can be
successfully deleted.

```
# Deletes the file named
File.delete (Path.fromStr "myfile.dat") [1, 2, 3]
```

> This does not securely erase the file's contents from disk; instead, the operating
system marks the space it was occupying as safe to write over in the future. Also, the operating
system may not immediately mark the space as free; for example, on Windows it will wait until
the last file handle to it is closed, and on UNIX, it will not remove it until the last
[hard link](https://en.wikipedia.org/wiki/Hard_link) to it has been deleted.
>
> [Path.delete] does the same thing, except it takes a [Path] instead of a [Str].

#### readBytes

**Type Annotation**

```roc
Str -> Task (List U8) [FileReadErr Path ReadErr]
```

**Description**

Reads all the bytes in a file.

```
# Read all the bytes in `myfile.txt`.
File.readBytes "myfile.txt"
```

This opens the file first and closes it after reading its contents.

> To read and decode data from a file, you can use `File.read` instead.
>
> [Path.readBytes] does the same thing, except it takes a [Path] instead of a [Str].

#### readUtf8

**Type Annotation**

```roc

    Str
    -> Task Str 
        [
            FileReadErr Path ReadErr,
            FileReadUtf8Err Path 
        ]
```

**Description**

Reads a [Str] from a file containing [UTF-8](https://en.wikipedia.org/wiki/UTF-8)-encoded text.

```
# Reads UTF-8 encoded text into a Str from the file "myfile.txt"
File.readUtf8 "myfile.txt"
```

This opens the file first and closes it after writing to it.
The task will fail with `FileReadUtf8Err` if the given file contains invalid UTF-8.

> To read unformatted bytes from a file, you can use [File.readBytes] instead.

> [Path.readUtf8] does the same thing, except it takes a [Path] instead of a [Str].

#### isDir

**Type Annotation**

```roc
Str -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a directory.
Any error will return false.
This uses [rust's std::path::is_dir](https://doc.rust-lang.org/std/path/struct.Path.html#method.is_dir).

> [Path.isDir] does the same thing, except it takes a [Path] instead of a [Str].

#### isFile

**Type Annotation**

```roc
Str -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a regular file.
Any error will return false.
This uses [rust's std::path::is_file](https://doc.rust-lang.org/std/path/struct.Path.html#method.is_file).

> [Path.isFile] does the same thing, except it takes a [Path] instead of a [Str].

#### isSymLink

**Type Annotation**

```roc
Str -> Task Bool [PathErr MetadataErr]
```

**Description**

Returns true if the path exists on disk and is pointing at a symbolic link.
Any error will return false.
This uses [rust's std::path::is_symlink](https://doc.rust-lang.org/std/path/struct.Path.html#method.is_symlink).

> [Path.isSymLink] does the same thing, except it takes a [Path] instead of a [Str].

#### type

**Type Annotation**

```roc

    Str
    -> Task 
        [
            IsFile,
            IsDir,
            IsSymLink
        ] [PathErr MetadataErr]
```

**Description**

Return the type of the path if the path exists on disk.
This uses [rust's std::path::is_symlink](https://doc.rust-lang.org/std/path/struct.Path.html#method.is_symlink).

> [Path.type] does the same thing, except it takes a [Path] instead of a [Str].

#### Reader

**Type Annotation**

#### openReader

**Type Annotation**

```roc
Str -> Task Reader [GetFileReadErr Path ReadErr]
```

**Description**

Try to open a `File.Reader` for buffered (= part by part) reading given a path string.
See [examples/file-read-buffered.roc](https://github.com/roc-lang/basic-cli/blob/main/examples/file-read-buffered.roc) for example usage.

This uses [rust's std::io::BufReader](https://doc.rust-lang.org/std/io/struct.BufReader.html).

Use [readUtf8] if you want to get the entire file contents at once.

#### openReaderWithCapacity

**Type Annotation**

```roc
Str, U64 -> Task Reader [GetFileReadErr Path ReadErr]
```

**Description**

Try to open a `File.Reader` for buffered (= part by part) reading given a path string.
The buffer will be created with the specified capacity.
See [examples/file-read-buffered.roc](https://github.com/roc-lang/basic-cli/blob/main/examples/file-read-buffered.roc) for example usage.

This uses [rust's std::io::BufReader](https://doc.rust-lang.org/std/io/struct.BufReader.html).

Use [readUtf8] if you want to get the entire file contents at once.

#### readLine

**Type Annotation**

```roc
Reader -> Task (List U8) [FileReadErr Path Str]
```

**Description**

Try to read a line from a file given a Reader.
The line will be provided as the list of bytes (`List U8`) until a newline (`0xA` byte).
This list will be empty when we reached the end of the file.
See [examples/file-read-buffered.roc](https://github.com/roc-lang/basic-cli/blob/main/examples/file-read-buffered.roc) for example usage.

This uses [rust's `BufRead::read_line`](https://doc.rust-lang.org/std/io/trait.BufRead.html#method.read_line).

Use [readUtf8] if you want to get the entire file contents at once.

### FileMetadata

#### FileMetadata

**Type Annotation**

**Description**

An opaque type that represents metadata about a file.

#### bytes

**Type Annotation**

```roc
FileMetadata -> U64
```

**Description**

Returns the number of bytes in the associated file.

#### isReadonly

**Type Annotation**

```roc
FileMetadata -> Bool
```

**Description**

Returns [Bool.true] if the associated file is read-only.

#### type

**Type Annotation**

```roc

    FileMetadata
    -> 
        [
            File,
            Dir,
            Symlink
        ]
```

**Description**

Returns the type of the associated file.

#### mode

**Type Annotation**

```roc

    FileMetadata
    -> 
        [
            Unix U32,
            NonUnix
        ]
```

**Description**

Returns the mode of the associated file.

### Http

#### Request

**Type Annotation**

**Description**

Represents an HTTP request.

#### Method

**Type Annotation**

**Description**

Represents an HTTP method.

#### Header

**Type Annotation**

**Description**

Represents an HTTP header e.g. `Content-Type: application/json`

#### TimeoutConfig

**Type Annotation**

**Description**

Represents a timeout configuration for an HTTP request.

#### Response

**Type Annotation**

**Description**

Represents an HTTP response.

#### Err

**Type Annotation**

**Description**

Represents an HTTP error.

#### errorBodyToBytes

**Type Annotation**

**Description**

Convert the ErrorBody of a BadStatus error to List U8.

#### defaultRequest

**Type Annotation**

```roc
Request
```

**Description**

A default [Request] value.

```
# GET "roc-lang.org"
{ Http.defaultRequest &
    url: "https://www.roc-lang.org",
}
```


#### header

**Type Annotation**

```roc
Str, Str -> Header
```

**Description**

An HTTP header for configuring requests.

See common headers [here](https://en.wikipedia.org/wiki/List_of_HTTP_header_fields).


#### handleStringResponse

**Type Annotation**

```roc
Response -> Result Str Err
```

**Description**

Map a [Response] body to a [Str] or return an [Err].

#### errorToString

**Type Annotation**

```roc
Err -> Str
```

**Description**

Convert an [Err] to a [Str].

#### send

**Type Annotation**

```roc
Request -> Task Response [HttpErr Err]
```

**Description**

Task to send an HTTP request, succeeds with a value of [Str] or fails with an
[Err].

```
# Prints out the HTML of the Roc-lang website.
response =
    { Http.defaultRequest & url: "https://www.roc-lang.org" }
    |> Http.send!

response.body
|> Str.fromUtf8
|> Result.withDefault "Invalid UTF-8"
|> Stdout.line
```

#### get

**Type Annotation**

```roc

    Str, 
    fmt
    -> Task body 
        [
            HttpErr Http.Err,
            HttpDecodingFailed
        ]
    where body implements Decoding, fmt implements DecoderFormatting
```

**Description**

Try to perform an HTTP get request and convert (decode) the received bytes into a Roc type.
Very useful for working with Json.

```
import json.Json

# On the server side we send `Encode.toBytes {foo: "Hello Json!"} Json.utf8`
{ foo } = Http.get! "http://localhost:8000" Json.utf8
```

### Stderr

#### Err

**Type Annotation**

**Description**

**BrokenPipe** - This error can occur when writing to a stdout that is no longer connected
to a valid input. For example, if the process on the receiving end of a pipe closes its
end, any write to that pipe could lead to a BrokenPipe error.

**WouldBlock** - This error might occur if stdout is set to non-blocking mode and the write
operation would block because the output buffer is full.

**WriteZero** - This indicates an attempt to write "zero" bytes which is technically a no-operation
(no-op), but if detected, it could be raised as an error.

**Unsupported** - If the stdout operation involves writing data in a manner or format that is not
supported, this error could be raised.

**Interrupted** - This can happen if a signal interrupts the writing process before it completes.

**OutOfMemory** - This could occur if there is not enough memory available to buffer the data being
written to stdout.

**Other** - This is a catch-all for any error not specifically categorized by the other ErrorKind
variants.

#### line

**Type Annotation**

```roc
Str -> Task {} [StderrErr Err]
```

**Description**

Write the given string to [standard error](https://en.wikipedia.org/wiki/Standard_streams#Standard_error_(stderr)),
followed by a newline.

> To write to `stderr` without the newline, see [Stderr.write].

#### write

**Type Annotation**

```roc
Str -> Task {} [StderrErr Err]
```

**Description**

Write the given string to [standard error](https://en.wikipedia.org/wiki/Standard_streams#Standard_error_(stderr)).

Most terminals will not actually display strings that are written to them until they receive a newline,
so this may appear to do nothing until you write a newline!

> To write to `stderr` with a newline at the end, see [Stderr.line].

### Stdin

#### Err

**Type Annotation**

**Description**

**EndOfFile** - This error occurs when an end-of-file (EOF) condition is met unexpectedly
during input operations. Typically indicates that no more data is available for reading.

**BrokenPipe** - This error happens when an attempt to write to a pipe cannot proceed because
the other end of the pipe has been closed. Common in IPC (Inter-Process Communication) scenarios.

**UnexpectedEof** - Similar to EndOfFile but specifically refers to cases where the EOF occurs
unexpectedly, possibly indicating truncated or corrupted data streams.

**InvalidInput** - This error is raised when an input operation receives data that is not in a
valid format, suggesting possible data corruption or a mismatch in expected data format.

**OutOfMemory** - Occurs when an operation fails due to insufficient memory available to
complete the operation. This can affect data reading, buffering, or processing.

**Interrupted** - This error can happen if an input operation is interrupted by a system
signal before it could complete, often needing a retry or causing the operation to fail.

**Unsupported** - Raised when an operation involves a feature or operation mode that is not
supported. This might involve character encodings, data compression formats, etc.

**Other** - A catch-all category for errors that do not fall into the specified categories.
Allows for flexible error handling of uncommon or unexpected conditions.

#### line

**Type Annotation**

```roc
Task Str [StdinErr Err]
```

**Description**

Read a line from [standard input](https://en.wikipedia.org/wiki/Standard_streams#Standard_input_(stdin)).

> This task will block the program from continuing until `stdin` receives a newline character
(e.g. because the user pressed Enter in the terminal), so using it can result in the appearance of the
programming having gotten stuck. It's often helpful to print a prompt first, so
the user knows it's necessary to enter something before the program will continue.

#### bytes

**Type Annotation**

```roc
{} -> Task (List U8) *
```

**Description**

Read bytes from [standard input](https://en.wikipedia.org/wiki/Standard_streams#Standard_input_(stdin)).
‼️ This function can read no more than 256 bytes at a time. Use [readToEnd] if you need more.

> This is typically used in combintation with [Tty.enableRawMode],
which disables defaults terminal bevahiour and allows reading input
without buffering until Enter key is pressed.

#### readToEnd

**Type Annotation**

```roc
{} -> Task (List U8) [StdinErr Err]
```

**Description**

Read all bytes from [standard input](https://en.wikipedia.org/wiki/Standard_streams#Standard_input_(stdin)) until EOF in this source.

### Stdout

#### Err

**Type Annotation**

**Description**

**BrokenPipe** - This error can occur when writing to a stdout that is no longer connected
to a valid input. For example, if the process on the receiving end of a pipe closes its
end, any write to that pipe could lead to a BrokenPipe error.

**WouldBlock** - This error might occur if stdout is set to non-blocking mode and the write
operation would block because the output buffer is full.

**WriteZero** - This indicates an attempt to write "zero" bytes which is technically a no-operation
(no-op), but if detected, it could be raised as an error.

**Unsupported** - If the stdout operation involves writing data in a manner or format that is not
supported, this error could be raised.

**Interrupted** - This can happen if a signal interrupts the writing process before it completes.

**OutOfMemory** - This could occur if there is not enough memory available to buffer the data being
written to stdout.

**Other** - This is a catch-all for any error not specifically categorized by the other ErrorKind
variants.

#### line

**Type Annotation**

```roc
Str -> Task {} [StdoutErr Err]
```

**Description**

Write the given string to [standard output](https://en.wikipedia.org/wiki/Standard_streams#Standard_output_(stdout)),
followed by a newline.

> To write to `stdout` without the newline, see [Stdout.write].


#### write

**Type Annotation**

```roc
Str -> Task {} [StdoutErr Err]
```

**Description**

Write the given string to [standard output](https://en.wikipedia.org/wiki/Standard_streams#Standard_output_(stdout)).

Note that many terminals will not actually display strings that are written to them until they receive a newline,
so this may appear to do nothing until you write a newline!

> To write to `stdout` with a newline at the end, see [Stdout.line].

### Tcp

#### Stream

**Type Annotation**

**Description**

Represents a TCP stream.

#### ConnectErr

**Type Annotation**

**Description**

Represents errors that can occur when connecting to a remote host.

#### StreamErr

**Type Annotation**

**Description**

Represents errors that can occur when performing a [Task] with a [Stream].

#### connect

**Type Annotation**

```roc
Str, U16 -> Task Stream ConnectErr
```

**Description**

Opens a TCP connection to a remote host.

```
# Connect to localhost:8080
stream = Tcp.connect! "localhost" 8080
```

The connection is automatically closed when the last reference to the stream is dropped.
Examples of
valid hostnames:
 - `127.0.0.1`
 - `::1`
 - `localhost`
 - `roc-lang.org`


#### readUpTo

**Type Annotation**

```roc
Stream, U64 -> Task (List U8) [TcpReadErr StreamErr]
```

**Description**

Read up to a number of bytes from the TCP stream.

```
# Read up to 64 bytes from the stream and convert to a Str
received = File.readUpTo! stream 64
Str.fromUtf8 received
```

> To read an exact number of bytes or fail, you can use [Tcp.readExactly] instead.

#### readExactly

**Type Annotation**

```roc

    Stream, 
    U64
    -> Task (List U8) 
        [
            TcpReadErr StreamErr,
            TcpUnexpectedEOF
        ]
```

**Description**

Read an exact number of bytes or fail.

```
File.readExactly stream 64
```

`TcpUnexpectedEOF` is returned if the stream ends before the specfied number of bytes is reached.


#### readUntil

**Type Annotation**

```roc
Stream, U8 -> Task (List U8) [TcpReadErr StreamErr]
```

**Description**

Read until a delimiter or EOF is reached.

```
# Read until null terminator
File.readUntil stream 0
```

If found, the delimiter is included as the last byte.

> To read until a newline is found, you can use [Tcp.readLine] which
conveniently decodes to a [Str].

#### readLine

**Type Annotation**

```roc

    Stream
    -> Task Str 
        [
            TcpReadErr StreamErr,
            TcpReadBadUtf8 
        ]
```

**Description**

Read until a newline or EOF is reached.

```
# Read a line and then print it to `stdout`
lineStr = File.readLine! stream
Stdout.line lineStr
```

If found, the newline is included as the last character in the [Str].


#### write

**Type Annotation**

```roc
Stream, List U8 -> Task {} [TcpWriteErr StreamErr]
```

**Description**

Writes bytes to a TCP stream.

```
# Writes the bytes 1, 2, 3
Tcp.writeBytes stream [1, 2, 3]
```

> To write a [Str], you can use [Tcp.writeUtf8] instead.

#### writeUtf8

**Type Annotation**

```roc
Stream, Str -> Task {} [TcpWriteErr StreamErr]
```

**Description**

Writes a [Str] to a TCP stream, encoded as [UTF-8](https://en.wikipedia.org/wiki/UTF-8).

```
# Write "Hi from Roc!" encoded as UTF-8
Tcp.writeUtf8 stream "Hi from Roc!"
```

> To write unformatted bytes, you can use [Tcp.write] instead.

#### connectErrToStr

**Type Annotation**

```roc
ConnectErr -> Str
```

**Description**

Convert a [ConnectErr] to a [Str] you can print.

```
when err is
    TcpPerfomErr (TcpConnectErr connectErr) ->
        Stderr.line (Tcp.connectErrToStr connectErr)
```


#### streamErrToStr

**Type Annotation**

```roc
StreamErr -> Str
```

**Description**

Convert a [StreamErr] to a [Str] you can print.

```
when err is
    TcpPerformErr (TcpReadErr err) ->
        errStr = Tcp.streamErrToStr err
        Stderr.line "Error while reading: $(errStr)"

    TcpPerformErr (TcpWriteErr err) ->
        errStr = Tcp.streamErrToStr err
        Stderr.line "Error while writing: $(errStr)"
```


### Url

#### Url

**Type Annotation**

**Description**

A [Uniform Resource Locator](https://en.wikipedia.org/wiki/URL).

It could be an absolute address, such as `https://roc-lang.org/authors` or
a relative address, such as `/authors`. You can create one using [Url.fromStr].

#### reserve

**Type Annotation**

```roc
Url, U64 -> Url
```

**Description**

Reserve the given number of bytes as extra capacity. This can avoid reallocation
when calling multiple functions that increase the length of the URL.

The following example reserves 50 bytes, then builds the url `https://example.com/stuff?caf%C3%A9=du%20Monde&email=hi%40example.com`;
```
Url.fromStr "https://example.com"
|> Url.reserve 50
|> Url.append "stuff"
|> Url.appendParam "café" "du Monde"
|> Url.appendParam "email" "hi@example.com"
```
The [Str.countUtf8Bytes](https://www.roc-lang.org/builtins/Str#countUtf8Bytes) function can be helpful in finding out how many bytes to reserve.

There is no `Url.withCapacity` because it's better to reserve extra capacity
on a [Str] first, and then pass that string to [Url.fromStr]. This function will make use
of the extra capacity.

#### fromStr

**Type Annotation**

```roc
Str -> Url
```

**Description**

Create a [Url] without validating or [percent-encoding](https://en.wikipedia.org/wiki/Percent-encoding)
anything.

```
Url.fromStr "https://example.com#stuff"
```

URLs can be absolute, like `https://example.com`, or they can be relative, like `/blah`.

```
Url.fromStr "/this/is#relative"
```

Since nothing is validated, this can return invalid URLs.

```
Url.fromStr "https://this is not a valid URL, not at all!"
```

Naturally, passing invalid URLs to functions that need valid ones will tend to result in errors.


#### toStr

**Type Annotation**

```roc
Url -> Str
```

**Description**

Return a [Str] representation of this URL.
```
# Gives "https://example.com/two%20words"
Url.fromStr "https://example.com"
|> Url.append "two words"
|> Url.toStr
```

#### append

**Type Annotation**

```roc
Url, Str -> Url
```

**Description**

[Percent-encodes](https://en.wikipedia.org/wiki/Percent-encoding) a
[path component](https://en.wikipedia.org/wiki/Uniform_Resource_Identifier#Syntax)
and appends to the end of the URL's path.

This will be appended before any queries and fragments. If the given path string begins with `/` and the URL already ends with `/`, one
will be ignored. This avoids turning a single slash into a double slash. If either the given URL or the given string is empty, no `/` will be added.

```
# Gives https://example.com/some%20stuff
Url.fromStr "https://example.com"
|> Url.append "some stuff"

# Gives https://example.com/stuff?search=blah#fragment
Url.fromStr "https://example.com?search=blah#fragment"
|> Url.append "stuff"

# Gives https://example.com/things/stuff/more/etc/"
Url.fromStr "https://example.com/things/"
|> Url.append "/stuff/"
|> Url.append "/more/etc/"

# Gives https://example.com/things
Url.fromStr "https://example.com/things"
|> Url.append ""
```

#### appendParam

**Type Annotation**

```roc

    Url, 
    Str, 
    Str
    -> Url
```

**Description**

Adds a [Str] query parameter to the end of the [Url].

The key and value both get [percent-encoded](https://en.wikipedia.org/wiki/Percent-encoding).

```
# Gives https://example.com?email=someone%40example.com
Url.fromStr "https://example.com"
|> Url.appendParam "email" "someone@example.com"
```

This can be called multiple times on the same URL.

```
# Gives https://example.com?caf%C3%A9=du%20Monde&email=hi%40example.com
Url.fromStr "https://example.com"
|> Url.appendParam "café" "du Monde"
|> Url.appendParam "email" "hi@example.com"
```


#### withQuery

**Type Annotation**

```roc
Url, Str -> Url
```

**Description**

Replaces the URL's [query](https://en.wikipedia.org/wiki/URL#Syntax)—the part
after the `?`, if it has one, but before any `#` it might have.

Passing `""` removes the `?` (if there was one).

```
# Gives https://example.com?newQuery=thisRightHere#stuff
Url.fromStr "https://example.com?key1=val1&key2=val2#stuff"
|> Url.withQuery "newQuery=thisRightHere"

# Gives https://example.com#stuff
Url.fromStr "https://example.com?key1=val1&key2=val2#stuff"
|> Url.withQuery ""
```

#### query

**Type Annotation**

```roc
Url -> Str
```

**Description**

Returns the URL's [query](https://en.wikipedia.org/wiki/URL#Syntax)—the part after
the `?`, if it has one, but before any `#` it might have.

Returns `""` if the URL has no query.

```
# Gives "key1=val1&key2=val2&key3=val3"
Url.fromStr "https://example.com?key1=val1&key2=val2&key3=val3#stuff"
|> Url.query

# Gives ""
Url.fromStr "https://example.com#stuff"
|> Url.query
```


#### hasQuery

**Type Annotation**

```roc
Url -> Bool
```

**Description**

Returns [Bool.true] if the URL has a `?` in it.

```
# Gives Bool.true
Url.fromStr "https://example.com?key=value#stuff"
|> Url.hasQuery

# Gives Bool.false
Url.fromStr "https://example.com#stuff"
|> Url.hasQuery
```


#### fragment

**Type Annotation**

```roc
Url -> Str
```

**Description**

Returns the URL's [fragment](https://en.wikipedia.org/wiki/URL#Syntax)—the part after
the `#`, if it has one.

Returns `""` if the URL has no fragment.

```
# Gives "stuff"
Url.fromStr "https://example.com#stuff"
|> Url.fragment

# Gives ""
Url.fromStr "https://example.com"
|> Url.fragment
```


#### withFragment

**Type Annotation**

```roc
Url, Str -> Url
```

**Description**

Replaces the URL's [fragment](https://en.wikipedia.org/wiki/URL#Syntax).

If the URL didn't have a fragment, adds one. Passing `""` removes the fragment.

```
# Gives https://example.com#things
Url.fromStr "https://example.com#stuff"
|> Url.withFragment "things"

# Gives https://example.com#things
Url.fromStr "https://example.com"
|> Url.withFragment "things"

# Gives https://example.com
Url.fromStr "https://example.com#stuff"
|> Url.withFragment ""
```


#### hasFragment

**Type Annotation**

```roc
Url -> Bool
```

**Description**

Returns [Bool.true] if the URL has a `#` in it.

```
# Gives Bool.true
Url.fromStr "https://example.com?key=value#stuff"
|> Url.hasFragment

# Gives Bool.false
Url.fromStr "https://example.com?key=value"
|> Url.hasFragment
```


### Utc

#### Utc

**Type Annotation**

**Description**

Stores a timestamp as nanoseconds since UNIX EPOCH

#### now

**Type Annotation**

```roc
{} -> Task Utc *
```

**Description**

Duration since UNIX EPOCH

#### toMillisSinceEpoch

**Type Annotation**

```roc
Utc -> I128
```

**Description**

Convert Utc timestamp to milliseconds

#### fromMillisSinceEpoch

**Type Annotation**

```roc
I128 -> Utc
```

**Description**

Convert milliseconds to Utc timestamp

#### toNanosSinceEpoch

**Type Annotation**

```roc
Utc -> I128
```

**Description**

Convert Utc timestamp to nanoseconds

#### fromNanosSinceEpoch

**Type Annotation**

```roc
I128 -> Utc
```

**Description**

Convert nanoseconds to Utc timestamp

#### deltaAsMillis

**Type Annotation**

```roc
Utc, Utc -> U128
```

**Description**

Calculate milliseconds between two Utc timestamps

#### deltaAsNanos

**Type Annotation**

```roc
Utc, Utc -> U128
```

**Description**

Calculate nanoseconds between two Utc timestamps

### Sleep

#### millis

**Type Annotation**

```roc
U64 -> Task {} *
```

**Description**

Sleep for at least the given number of milliseconds.
This uses [rust's std::thread::sleep](https://doc.rust-lang.org/std/thread/fn.sleep.html).


### Cmd

#### Cmd

**Type Annotation**

**Description**

Represents a command to be executed in a child process.

#### Err

**Type Annotation**

**Description**

Errors from executing a command.

#### outputErrToStr

**Type Annotation**

```roc
    
    (
        Output,
        Err
    )
    -> Str
```

#### Output

**Type Annotation**

**Description**

Represents the output of a command.

#### new

**Type Annotation**

```roc
Str -> Cmd
```

**Description**

Create a new command to execute the given program in a child process.

#### arg

**Type Annotation**

```roc
Cmd, Str -> Cmd
```

**Description**

Add a single argument to the command.
! Shell features like variable subsitition (e.g. `$FOO`), glob patterns (e.g. `*.txt`), ... are not available.

```
# Represent the command "ls -l"
Cmd.new "ls"
|> Cmd.arg "-l"
```


#### args

**Type Annotation**

```roc
Cmd, List Str -> Cmd
```

**Description**

Add multiple arguments to the command.
! Shell features like variable subsitition (e.g. `$FOO`), glob patterns (e.g. `*.txt`), ... are not available.

```
# Represent the command "ls -l -a"
Cmd.new "ls"
|> Cmd.args ["-l", "-a"]
```


#### env

**Type Annotation**

```roc

    Cmd, 
    Str, 
    Str
    -> Cmd
```

**Description**

Add a single environment variable to the command.

```
# Run "env" and add the environment variable "FOO" with value "BAR"
Cmd.new "env"
|> Cmd.env "FOO" "BAR"
```


#### envs

**Type Annotation**

```roc

    Cmd,     List 
    (
        Str,
        Str
    )
    -> Cmd
```

**Description**

Add multiple environment variables to the command.

```
# Run "env" and add the variables "FOO" and "BAZ"
Cmd.new "env"
|> Cmd.envs [("FOO", "BAR"), ("BAZ", "DUCK")]
```


#### clearEnvs

**Type Annotation**

```roc
Cmd -> Cmd
```

**Description**

Clear all environment variables, and prevent inheriting from parent, only
the environment variables provided to command are available to the child.

```
# Represents "env" with only "FOO" environment variable set
Cmd.new "env"
|> Cmd.clearEnvs
|> Cmd.env "FOO" "BAR"
```


#### output

**Type Annotation**

```roc

    Cmd
    -> Task Output 
        [
            CmdOutputError 
                (
                    Output,
                    Err
                )
        ]
```

**Description**

Execute command and capture stdout and stderr

> Stdin is not inherited from the parent and any attempt by the child process
> to read from the stdin stream will result in the stream immediately closing.


#### status

**Type Annotation**

```roc
Cmd -> Task {} [CmdError Err]
```

**Description**

Execute command and inherit stdin, stdout and stderr from parent


#### exec

**Type Annotation**

```roc
Str, List Str -> Task {} [CmdError Err]
```

**Description**

Execute command and inherit stdin, stdout and stderr from parent

```
# Call echo to print "hello world"
Cmd.exec! "echo" ["hello world"]
```

### Tty

#### enableRawMode

**Type Annotation**

```roc
{} -> Task {} *
```

**Description**

Enable terminal raw mode which disables some default terminal bevahiour.

The following modes are disabled:
- Input will not be echo to the terminal screen
- Input will not be buffered until Enter key is pressed
- Input will not be line buffered (input sent byte-by-byte to input buffer)
- Special keys like Backspace and CTRL+C will not be processed by terminal driver

Note: we plan on moving this function away from basic-cli in the future, see github.com/roc-lang/basic-cli/issues/73


#### disableRawMode

**Type Annotation**

```roc
{} -> Task {} *
```

**Description**

Revert terminal to default behaviour

Note: we plan on moving this function away from basic-cli in the future, see github.com/roc-lang/basic-cli/issues/73